Heavy-duty seat covers that let your truck
be a truck.
500D Cordura. Same fabric weight as a work pack.
245 grams of nylon per square meter, woven 53 × 35. A PFAS-free water-repellent finish sits on the face and 2 layers of clear PU on the back. Coffee beads up and wipes off. Claws and toolbox corners have a much harder time getting through.
Your 80-lb lab jumps in. The cover stays put.
Chevron holds in 3 places. A laced hood grips the headrest, a buckled harness wraps the seatback, and a shock cord runs around the cushion and hooks under the seat. It doesn’t creep forward on leather.
2 clicks and a tug. That’s the install.
Pull the hood over the headrest. Clip the 2 buckles behind the seat. Hook the cord underneath and pull it snug. About 3 minutes, no tools, and no 40-minute YouTube video.
Sized for your seat: S, M or L.
Pick your make, model and year and we’ll tell you the size. We’ve mapped 678 vehicles from 2010 to 2026: a Wrangler or Bronco takes S, an F-150, Tacoma or RAM 1500 takes M, and a Silverado or Tundra takes L. Same cover fits 2nd-row captain’s chairs, so a 3-row SUV or minivan can run Chevron front to back.
Back seat covered. Buckles still in reach.
The rear bench cover has slots where the belt buckles come through, so kids and car seats click in like normal. 3 separate headrest hoods hold the top edge, middle seat included, so the center doesn’t sag.
Patch it. Make it yours.
The headrest hood carries a Velcro panel for morale patches, unit patches or the dumb one your buddy brought back from Moab. Swap them whenever you feel like it.
Chevron vs. a typical $25 seat cover
| Feature | Chevron by Owleys | Typical cover |
|---|---|---|
| Fabric | 500D Cordura nylon, 245 g/m² | Thin polyester with PVC backing |
| Water | PFAS-free water-repellent face + 2-layer PU | Coating peels, leaks at the seams |
| Holds in | 3 points: headrest hood, back harness, under-seat cord | 2 straps and elastic corners |
| Hardware | POM buckles and polyester cord | Metal hooks that chew up your washer |
| Fit | S / M / L by make, model and year | One “universal” size |
| Rear bench | Buckle slots + 3 headrest hoods | Center buckle covered, middle sags |
| Extras | Velcro patch panel, storage bag | None |
Dimensions & Specifications
| Fabric | Cordura Classic 500D × 500D nylon | |
| Fabric weight | 7.2 oz/yd² (245 g/m²) | |
| Weave density | 53 × 35 | |
| Face finish | PFAS-free water-repellent | |
| Backing | Clear PU, 2 layers | |
| Hardware | POM (acetal) buckles, polyester shock cord | |
| Size S (W × H) | Front cover: 24.4″ × 55″ (62 × 140 cm) Rear bench cover: 53.1″ × 51.2″ (135 × 130 cm) |
|
| Size M (W × H) | Front cover: 26″ × 57.5″ (66 × 146 cm) Rear bench cover: 57″ × 51.2″ (145 × 130 cm) |
|
| Size L (W × H) | Front cover: 27.5″ × 60″ (70 × 152 cm) Rear bench cover: 62″ × 53.1″ (157 × 135 cm) |
|
| Shock cord | 63 in (160 cm) | |
| Harness strap | 17.7 in (45 cm) | |
| In the box, rear | Cover, 3 headrest hoods, storage bag | |
| In the box, front | Cover, storage bag | |
| Colors | Orange, Black, Light Gray, Charcoal, Navy, Coyote | |
Questions drivers ask before they buy
Use the fit checker above: pick your make, model and year to find the recommended size. We’ve mapped 678 vehicles from 2010 to 2026. Both front and rear bench covers come in S, M and L. Check the dimensions for your selected size before ordering.
Chevron is water-resistant. The face sheds water, while the 2-layer PU backing helps keep spills and wet fur from soaking through. Clean up spills promptly, since standing water can still find its way through a seam.
The cover is designed to leave the outer seatback seam open, where many seat-mounted airbags deploy. Compatibility depends on your seat and airbag design. Check your vehicle owner’s manual before installation, keep all airbag deployment areas clear, and use the cover only if your vehicle manufacturer permits it.
Yes. The 500D nylon helps protect your upholstery from claws, fur and everyday messes, while the under-seat cord helps keep the cushion section in place as your dog climbs in. The cover protects the seat but does not restrain your dog, so use a suitable vehicle restraint for the ride.
Shake off loose dirt, vacuum up fur, and wipe spills with a damp cloth. For muddy messes, remove the cover, hose it down, and hang it to dry completely before reinstalling.
Chevron anchors at the headrest, around the seatback and under the cushion to help hold it in place on leather, vinyl and cloth seats. Adjust the straps and cord for a snug fit, then check and retighten them after your first drive.
The rear bench cover has slots for access to the seat belt buckles. Before installing a child car seat over the cover, check both the vehicle and car seat manufacturer’s instructions. Use it underneath a child car seat only if both manufacturers permit it, and keep all required belt paths and anchors accessible.
Chevron combines 500D CORDURA nylon with a fitted headrest hood, a buckled back harness, S/M/L sizing by vehicle, and a Velcro patch panel. A matching rear bench cover with buckle slots is also available. Carhartt features vary by product, so compare the specific models when choosing.
Yes. The front seat cover fits captain’s chairs, including 2nd-row captain’s chairs in minivans and 3-row SUVs. If your 2nd row has 2 captain’s chairs, the Front Pair covers both. Use the fit checker for the size.
These heavy-duty seat covers tackle everything life throws at your truck. The material is just like armor- dirt and spills don't stand a chance
These are okay. I expected a snugger fit.
These seat covers are lifesavers for road trips with pets and kids!!!